Now showing items 1-4 of 4
Corrosion of Reinforcement in Relation to Presence of Defects at the Interface Between Steel and Concrete
(ASCE-AMER SOC CIVIL ENGINEERS, 1801 ALEXANDER BELL DR, RESTON, VA 20191-4400 USA, 2005-08)
In this study, steel-concrete interface defects were analyzed in order to define their potential to induce corrosion. Various types of steel-concrete interface defects were classified into two main groups: macrodefects and ...
Seismic Response Analysis of Masonry Minaret and Possible Strengthening by Fiber Reinforced Cementitious Matrix (FRCM) Materials
(Hindawi Publishing Corporation, 410 Park Avenue, 15Th Floor, #287 Pmb, New York, Ny 10022 Usa, 2013)
This paper presents the analytical study on the dynamic response of a natural stone block masonry minaret of a historical mosque located in Istanbul, Turkey. A three-dimensional finite element model of the whole minaret, ...
Comparative Study of the Characteristics of Nano Silica-, Silica Fume- and Fly Ash-Incorporated Cement Mortars
(Univ Fed Sao Carlos, Dept Engenharia Materials, Laboratoria De Materiais Vitreos, Caixa Postal 676, Sao Carlos, 13565-905Sp, Brazil, 2014)
The structural characteristics of cement mortars, impregnated with nano silica (NS), silica fume (SF) and fly ash (FA), were comparatively studied using Fourier transform infrared spectrometer (FTIR), thermogravimeter-differential ...
A capacity curve model for confined clay brick infills
(Springer, Van Godewijckstraat 30, 3311 Gz Dordrecht, Netherlands, 2016-03)
Experimental studies have proven that clay brick infills, confined with carbon-fiber-reinforced polymers (CFRP) in reinforced concrete (RC) frames, have some advantages in terms of stiffness, strength, energy dissipation ...